XPander Devices

XPander incorporates entirely new designs with respect to the wireless communication system. A Radio Interface is connected to the loop. It communicates with the control panel using the Apollo addressable two-wire power and communications system. The interface communicates with the detection and alarm signalling devices by means of radio waves. The detectors are multistate in that they report normal, pre-alarm, fire or fault states to the radio base which transmits the information to the interface. The detectors incorporate drift compensation and report any compensation limit occurring. The radio bases and signalling devices are addressable and use a pre-set analogue value to report via the XP95 or Discovery protocol. Apart from normal and fire the bases can send pre-set analogue values to indicate low battery, detector contaminated, detector tamper and low signal strength fault conditions.
-
XPander Combined Sounder Visual Indicator (White) and Optical Smoke Detector
SKU: XPA-CB-14024-APO
£224.09 £268.91 -
XPander Combined Sounder Visual Indicator (Red) and Heat Detector CS
SKU: XPA-CB-14022-APO
£224.09 £268.91 -
XPander Combined Sounder Visual Indicator (Red) and Heat Detector A1R
SKU: XPA-CB-14021-APO
£224.09 £268.91 -
XPander Combined Sounder Visual Indicator (Red) and Optical Smoke Detector
SKU: XPA-CB-14020-APO
£224.09 £268.91 -
-
-
-
-
XPander Heat Detector A1R and Mounting Base (Rate-of-Rise 57°C)
SKU: XPA-CB-11170-APO
£110.93 £133.12